Jimmy Connors, John McEnroe and Steffi Graf were some of the most famous professional tennis players to command the revolution of large racquets in the mid-1970s, 1980s and 1990s. A large racquet, by definition, has a point Sweet bigger, making it easier to avoid the error of the ball. The stringing of your racquet, however, will make the difference in how it is played and how you play.
It is difficult to find a tennis racquet with a traditional wooden structure, which has a head size of about 65 square inches. The modern rackets tend to oscillate between a medium size (85 to 95 square inches) to medium plus (95 to 105 square inches) to what is now known as large, which is somewhat higher than 105 square inches. At the date of publication, most frames are made of some material composed of graphite, fiberglass and metal alloys.
Tension of the ropes in a large racquet
Racket manufacturers recommend ranges of tension for each racket they produce, and information can usually be found in the frame of the racket. The general rule is less tension to get more power and more tension for better control. The recommended tensions vary according to the size of the head and the composition of the frame, and so you feel comfortable in the way you play. Typical stresses usually fall between 50 and 70 pounds.
Strings and string pattern
The tennis strings have evolved with the size of the racket, from the traditional natural cow gut to the synthetic cords, such as nylon, polyester, synthetic gut, metal alloys and different combinations. The evolution was mainly due to the price. As of the date of publication, you can buy nylon ropes for your racket for less than US $ 10, while natural casing costs more than US $ 40. You can use a single string for your entire racket, or you can use a single piece for vertical stringing and another for horizontal cross stringing. An open pattern requires less rope and results in more space between the strings. It should also lead to more power and generate more effect. A closed pattern creates a denser string that allows for greater control and durability of the rope.
Racket stringing machines
Most players prefer to have their rackets strung by a pro, which can cost as much as $ 20 for the racket. However, some serious players want control and buy racket stringing machines. The three types of machines available are electronic, dropped weight and crank (spring tension). Electronic machines are the most expensive and most demanding in terms of the tension of the adjustment. They are also variable in terms of how frames are mounted, which is important when dealing with some large racket frames, where they are wider. The stringing machines used are in the range of US $ 100. High-end machines can cost US $ 3,000 or more. If you are a serious stringer, you can try several before finding one that suits your needs.
How to string a large racquet
All stringing machines must include instructions for use. Secure your racquet on the mounting bracket and adjust the stringing tension without exceeding the voltage limit by the manufacturer as you can damage the structure. Prepare the recommended amount of rope (It could be 30 to 40 feet or more), depending on the size of the racket. Insert the first main string vertically in the center of the head and fix it to the desired tension. Next, apply the main ropes above and below the racket on the neck. When you have completed it, tie it in the throat with a figure of eight knots and release the clamp and tension (two-string method), or find the nearest horizontal hole to start the cross-stringing (method of a string). Open the crosses with the clamp in place for the desired tension. Apply and attach to each cross, tying with the figure of eight knots with the final cross. Release the clamp and tension, and cut the excess rope. It may take several attempts before obtaining the desired result.